Frequently Asked Questions
What is pendulum slip testing?
Pendulum slip testing is a recognised method of measuring the slip resistance of pedestrian surfaces. The test simulates the action of a person’s heel striking the floor and produces a Pendulum Test Value (PTV), which indicates the slip resistance of the surface.
What is a PTV?
PTV stands for Pendulum Test Value.
It is the numerical result obtained from a pendulum slip resistance test and is used to assess the slip potential of a surface.
Generally, the higher the PTV, the greater the slip resistance.
What PTV is considered safe?
The Health and Safety Authority (HSA) and industry guidance commonly use the following categories:
PTV Value | Slip Potential |
0 – 24 | High |
25 – 35 | Moderate |
36+ | Low |
For most pedestrian surfaces, a wet PTV of 36 or above is generally considered to represent a low slip potential.
Why should I have my floors tested?
Testing provides objective evidence of floor performance.
It can help identify potential hazards, support risk assessments, verify flooring installations and demonstrate that floor safety is being properly managed
Is slip resistance testing a legal requirement?
Irish health and safety legislation requires employers and those responsible for premises to provide safe pedestrian surfaces and manage slip risks appropriately.
While legislation does not generally specify routine slip testing, objective testing can provide valuable evidence that slip risks have been assessed and managed.
Can a floor look safe but still be slippery?
Yes.
Many floors appear safe when dry but can become hazardous when wet, contaminated or worn.
Visual inspection alone cannot determine the slip resistance performance of a surface.
How is the test carried out?
A calibrated pendulum tester fitted with a standard rubber slider is used to measure the friction generated by the floor surface.
Multiple readings are taken and averaged to determine the Pendulum Test Value (PTV).
Testing is normally carried out on-site with minimal disruption.
Can testing be carried out in occupied buildings?
Yes.
Testing can usually be completed while buildings remain operational, with minimal disruption to occupants and activities.
Can you test external surfaces?
Yes.
External walkways, paving, ramps, access routes and other pedestrian areas can all be tested.
Can you test wet and dry conditions?
Yes.
Testing can be carried out under dry conditions, wet conditions or other service conditions where appropriate.
Wet testing is often particularly important where water contamination is likely.
How long does testing take?
The time required depends on the number of locations being assessed and the complexity of the site.
Many projects can be completed within a few hours.
How quickly will I receive my report?
Reports are normally issued promptly following completion of testing.
Timescales may vary depending on the size and complexity of the project.
What information is included in the report?
Reports will include:
- Test locations
- Surface descriptions
- Pendulum Test Values (PTV)
- Wet and/or dry results
- Photographs
- Site observations
- Risk interpretation
- Practical recommendations
Do you provide recommendations?
Yes.
Where appropriate, practical recommendations can be provided to help improve safety and manage slip risk.
Do you sell anti-slip treatments or flooring products?
No.
Slip Risk is an independent testing company.
We do not sell flooring products, coatings or anti-slip treatments.
Our role is to provide objective measurement, clear reporting and practical advice.
Can you investigate a slip incident?
Yes.
Independent testing can provide objective information regarding the slip resistance characteristics of the surface involved.
This may assist employers, property owners, insurers and legal professionals in understanding floor performance.
How often should floors be tested?
There is no single answer that applies to every building.
Factors such as usage levels, cleaning methods, wear, contamination and environmental conditions can all affect slip resistance.
Many organisations choose to incorporate periodic testing into their wider risk management and maintenance programmes.
What types of organisations use slip resistance testing?
We work with:
- Property managers
- Employers
- Safety professionals
- Main contractors
- Developers
- Healthcare facilities
- Schools and universities
- Hotels and leisure facilities
- Retail operators
- Manufacturing facilities
- Local authorities
What areas do you cover?
Slip Risk provides independent slip resistance testing services throughout Ireland.
Still Have Questions?
If you would like to discuss a project or arrange testing, please contact us.
Know Your PTV
Measure. Monitor. Reduce.